Untitled Document

Multi-Scale Charge Ltd.t

 

Multi-Scale Charge Ltd.

MANUALS

 

Shuttle Charge Bar Model


Powder Baffle


Powder Chart

 

Steel Shot Chart

 

Lead Shot Chart

 

Bismuth Shot Chart


Adjusting the Powder and Shot Valves

 

Checking Powder Charts


Reading the Powder and Shot Charts


Calculating additional Powder and Shot settings


Additional Essential Tools (not included)


Assembly

 

Removing the Shot Valve inserts


General Cares

 

Glossary


Picture and Line Drawing


Additional Notes

 

Checking Powder Charges

We endorse checking charges with a reliable scale and adhering to loads recommended by powder manufacturers. We also advise the use of safety glasses.

We disclaim all responsibility or liability for damage or injury resulting from reloading shotshell, etc..

HOW TO CHECK POWDER CHARGES

I suggest this: Completely reload 25 rounds of shotshell. Then: Take ten rounds from somewhere in the middle, cut them open and weigh the powder on a reliable scale. The weight difference amongst any of the ten charges should not exceed + or - 2%. On a charge weight of 20 grains the weight difference should be no more than 0.8 grains.

 

CAUTION:

USE POWDER AND SHOT CHARTS ONLY FOR THE BARS WITH WHICH THEY CAME.

MODEL B201 POWDER AND SHOT CHARTS ARE FOR USE ONLY WITH MODEL B201.

MODEL B201 POWDER AND SHOT CHARTS ARE NOT TO BE USED WITH MODEL "C/CS" AND MODEL "D/DS" OR FOR ANY OTHER MODEL CHARGE BAR.

THE METHOD OF CALIBRATION FOR THESE MODELS IS DIFFERENT ENTIRELY FROM MODEL B201.

USE OF THE WRONG POWDER AND/OR SHOT CHART COULD RESULT IN SERIOUS DAMAGE AND/OR INJURY.

DO NOT USE THE UNIVERSAL CHARGE BAR WITHOUT A POWDER SCALE.

 

___________________________________________________________________________________________________

It is strongly advised to check all charges (powder & shot) with a reliable scale.
(see " How to check powder charges ".)

___________________________________________________________________________________________________

Common sense precautions are advised. Make sure you fully understand the instructions before beginning. If you do not clearly understand the instructions, do NOT use the Bar!

Avoid careless handling of flammables and explosives as this can result in serious injury or death.

 

___________________________________________________________________________
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

ALWAYS use common sense
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Regardless whether you are using charts,
your own calculations,
or those of someone else,
review ALL settings for logical consistency
B E F O R E loading and firing
a charge based on a given setting.
___________________________________________________________________________


CAUTION:

USE POWDER AND SHOT CHARTS ONLY FOR THE BARS WITH WHICH THEY CAME.

MODEL B201 POWDER AND SHOT CHARTS ARE FOR USE ONLY WITH MODEL B201.

MODEL B201 POWDER AND SHOT CHARTS ARE NOT TO BE USED WITH MODEL "C/CS" AND MODEL "D/DS" OR FOR ANY OTHER MODEL CHARGE BAR.

THE METHOD OF CALIBRATION FOR THESE MODELS IS DIFFERENT ENTIRELY FROM MODEL B201.

USE OF THE WRONG POWDER AND/OR SHOT CHART COULD RESULT IN SERIOUS DAMAGE AND/OR INJURY.

DO NOT USE THE UNIVERSAL CHARGE BAR WITHOUT A POWDER SCALE. ______________________________________________________________________________________

It is strongly advised to check all charges (powder & shot) with a reliable scale.
(see " How to check powder charges ".)

______________________________________________________________________________________

Common sense precautions are advised. Make sure you fully understand the instructions before beginning. If you do not clearly understand the instructions, do NOT use the Bar!

Avoid careless handling of flammables and explosives as this can result in serious injury or death.

Powder Charts

______________________________________________________________________________________

Read ALL instructions carefully before beginning.

Multi-Scale Charge Ltd.t
Copyright ©1980-2008 Multi-Scale Charge Ltd. Last updated: March 2016